[c-nsp] Anyconnect force upgrade

Scott Voll svoll.voip at gmail.com
Mon Dec 19 16:04:43 EST 2011

Alan and Mike--

thanks, but that is the same stuff i've found.  I'm looking for the
Commands or ASDM steps to make it happen.  I found "client-update enable",
but is that the command?  It still updated the anyconnect client after i
removed it.  (ASA 8.4.2 and anyconnect 2.5.x)



On Mon, Dec 19, 2011 at 12:40 PM, Alan Buxey <A.L.M.Buxey at lboro.ac.uk>wrote:

> Hi,
> > easy question I'm sure..... How do you turn off the feature on the ASA
> that
> > forces the upgrade of anyconnect?
> Q. Is there a way to prevent the Adaptive Security Appliance (ASA) from
> automatically upgrading to a new AnyConnect version?
> A. Not prior to AnyConnect version .With version and
> beyond there is a capability to not automatically upgrade the client. It's
> via a profile Autoupdate parameter. Please reference the Release notes for
> these preferences options.
> http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect23/release/notes/anyconnect23rn.html#wp908334
> with thanks to cisco support forums.... and google  ;-)
> ....and I believe if you put an old version on the ASA then the
> update/upgrade wont happen - so keep
> the version on ASA disk as old as the oldest version you want to support
> alan

More information about the cisco-nsp mailing list