[c-nsp] Vlan and subinterface

[ujjwal maghaiya]

what is VLAN necessary inorder to create sub interface.
 



Date: Fri, 23 Dec 2011 10:22:42 -0500
Subject: Re: [c-nsp] Vlan and subinterface
From: ttauber at 1-4-5.net
To: ujjwal_12 at hotmail.com
CC: cisco-nsp at puck.nether.net

No, you can configure multiple subnets as secondary IP addresses like this:

!
interface gigabitEthernet 1/1
  ip address 192.0.2.1 255.255.255.240
  ip address 192.0.2.193 255.255.255.224 secondary
  ip address 203.0.113.65 255.255.255.192 secondary
!

I'm not positive what you meant.

Tony


On Fri, Dec 23, 2011 at 6:43 AM, ujjwal maghaiya <ujjwal_12 at hotmail.com> wrote:


Dears,

Just a confusion.
is it necessary to confiugre VLAN if i want to configure multiple subinterfaces with different SUBNETS in single physical interface.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/