[c-nsp] Filtering Layer 2 Multicasts on 6509
Sebastian Wiesinger
cisco-nsp at ml.karotte.org
Tue Feb 1 03:21:20 EST 2011
* Tóth András <diosbejgli at gmail.com> [2011-01-28 00:13]:
> Hi Sebastian,
>
> Unfortunately the Command Reference was showing an old information.
> There was an enhancement fix in 12.2(46)SG to enable the 'access-list
> hardware capture mode' command on Sup6 as well, so you can enable it
> vlan capture mode.
>
> By the way, the Command Reference is now reflecting the correct information :)
Hi,
thank you for that. We upgraded the IOS and changed to capture mode
vlan which worked as expected on SUP 6-E. One thing I noticed: IPv6
Multicast (including OSPFv3, VRRP) is still going to the CPU. Is there
a command I can issue (like no ip igmp snooping for IPv4) to prevent
this?
Regards,
Sebastian
--
New GPG Key: 0x93A0B9CE (F4F6 B1A3 866B 26E9 450A 9D82 58A2 D94A 93A0 B9CE)
Old GPG Key-ID: 0x76B79F20 (0x1B6034F476B79F20)
'Are you Death?' ... IT'S THE SCYTHE, ISN'T IT? PEOPLE ALWAYS NOTICE THE SCYTHE.
-- Terry Pratchett, The Fifth Elephant
More information about the cisco-nsp
mailing list