[c-nsp] MSC Cisco CRS-1

[Rano Karno]

Hi Braga,

you can use " show platform" command.
more detail from "admin" mode.

sample:
RP/0/RP0/CPU0:router# show platform
Node            Type            PLIM            State           Config State
-----------------------------------------------------------------------------
0/0/SP          MSC(SP)         N/A             IOS-XR RUN      PWR,NSHUT,MON
0/0/CPU0        MSC             16OC48-POS/DPT  IOS-XR RUN      PWR,NSHUT,MON
0/2/SP          MSC(SP)         N/A             IOS-XR RUN      PWR,NSHUT,MON
0/2/CPU0        MSC             16OC48-POS/DPT  IOS-XR RUN      PWR,NSHUT,MON
0/RP0/CPU0      RP(Standby)     N/A             IOS-XR RUN      PWR,NSHUT,MON
0/RP1/CPU0      RP(Active)      N/A             IOS-XR RUN      PWR,NSHUT,MON
0/SM0/SP        FC/S(SP)        N/A             IOS-XR RUN      PWR,NSHUT,MON

here u see MSC is 16OC48 = 16x 2.5Gbps = 40Gbps

regards,
Rano

--- On Fri, 11/2/11, Alessandro Braga <sandro.unix at gmail.com> wrote:

From: Alessandro Braga <sandro.unix at gmail.com>
Subject: [c-nsp] MSC Cisco CRS-1
To: "cisco-nsp" <cisco-nsp at puck.nether.net>
Date: Friday, 11 February, 2011, 10:28 PM

Dear,

which the command can I use in IOS-XR (CRS-1) to obtain MSC details; eg
Performance (20G,40G, 140G).

The commands bellow don't show it:
show inventory
show version

I think that 'show diag ?' will show, I'm correct?


Brgs,
Alessandro Braga
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/