[c-nsp] MSC Cisco CRS-1

[Alessandro Braga]

Rano,

thanks for your reply. But I need to know if my MSC supports 20G, 40G or
140G. you understand?

I know that Cisco have more than one MSC models, and I would like to know
what MSC model has in my CRS-1, if is 20g, 40g or other.

My router:

RP/0/RP1/CPU0:router#show platform

Node            Type            PLIM            State           Config State
------------------------------------------------------------------------------
0/0/CPU0        MSC             Jacket Card      IOS XR RUN
PWR,NSHUT,MON
0/0/0           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/0/2           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/0/3           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/0/5           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/3/CPU0        MSC             Jacket Card      IOS XR RUN
PWR,NSHUT,MON
0/3/0           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/3/2           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/3/3           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/3/5           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/4/CPU0        MSC             Jacket Card      IOS XR RUN
PWR,NSHUT,MON
0/4/0           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/4/2           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/4/3           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/4/5           MSC(SPA)        1x10GE           OK
PWR,NSHUT,MON
0/7/CPU0        MSC             Jacket Card      IOS XR RUN
PWR,NSHUT,MON
0/7/0           MSC(SPA)        10X1GE           OK
PWR,NSHUT,MON
0/RP0/CPU0      RP(Standby)     N/A              IOS XR RUN
PWR,NSHUT,MON
0/RP1/CPU0      RP(Active)      N/A              IOS XR RUN
PWR,NSHUT,MON
RP/0/RP1/CPU0:router#


Brgs,
AB

2011/2/11 Rano Karno <chubby_cripth at yahoo.com>

> Hi Braga,
>
> you can use " show platform" command.
> more detail from "admin" mode.
>
> sample:
> RP/0/RP0/CPU0:router# show platform
> Node            Type            PLIM            State           Config
> State
>
> -----------------------------------------------------------------------------
> 0/0/SP          MSC(SP)         N/A             IOS-XR RUN
>  PWR,NSHUT,MON
> 0/0/CPU0        MSC             16OC48-POS/DPT  IOS-XR RUN
>  PWR,NSHUT,MON
> 0/2/SP          MSC(SP)         N/A             IOS-XR RUN
>  PWR,NSHUT,MON
> 0/2/CPU0        MSC             16OC48-POS/DPT  IOS-XR RUN
>  PWR,NSHUT,MON
> 0/RP0/CPU0      RP(Standby)     N/A             IOS-XR RUN
>  PWR,NSHUT,MON
> 0/RP1/CPU0      RP(Active)      N/A             IOS-XR RUN
>  PWR,NSHUT,MON
> 0/SM0/SP        FC/S(SP)        N/A             IOS-XR RUN
>  PWR,NSHUT,MON
>
> here u see MSC is 16OC48 = 16x 2.5Gbps = 40Gbps
>
> regards,
> Rano
>
> --- On Fri, 11/2/11, Alessandro Braga <sandro.unix at gmail.com> wrote:
>
> From: Alessandro Braga <sandro.unix at gmail.com>
> Subject: [c-nsp] MSC Cisco CRS-1
> To: "cisco-nsp" <cisco-nsp at puck.nether.net>
> Date: Friday, 11 February, 2011, 10:28 PM
>
> Dear,
>
> which the command can I use in IOS-XR (CRS-1) to obtain MSC details; eg
> Performance (20G,40G, 140G).
>
> The commands bellow don't show it:
> show inventory
> show version
>
> I think that 'show diag ?' will show, I'm correct?
>
>
> Brgs,
> Alessandro Braga
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>