[c-nsp] Does anyone knows how to download IOS on a ASR1002?

[Ramcharan, Vijay A]

If I remember correctly, 

Put the image onto a FAT formatted USB flash stick. 
Insert the USB stick into the USB 0 or equivalent port on the router and
reboot it. 
Once the router boots up into rommon, do a boot usb0:<image name> or
equivalent. 
Once the router boots up copy the image from the USB stick onto the
appropriate flash/bootflash locations and set your boot variables
accordingly. 

The datasheet says that 1GB flash is supported but I've used a 4GB stick
before. 

Vijay Ramcharan 
 

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Nathaniel Bernadeau
> Sent: Thursday, February 17, 2011 2:26 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Does anyone knows how to download IOS on a ASR1002?
> 
> My customer has a ASR1002 with no IOS.  How should we go about getting
> IOS and downloading onto thee ASR1002?
> 
> Ha said;
> 
> "No IOS was found on the box....flash is empty..
> I cant boot device".
> 
> --
> regards,
> 
> Nathaniel Bernadeau
> Gallant Systems,  LLC
> 11064 Livingston RD Suite 106-C
> Fort Washington, MD 20744
> Toll Free: 888-836-3751
> Ph: 301-627-6358
> Fax: 240-823-6897
> Cell: 202-246-2229
> nbernadeau at gallantsys.com
> www.gallantsys.com
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/