[c-nsp] ASA 5505 doesn't like itself

[Scott Voll]

what does show xlate show?

I'm guessing it's a Nate issue.

Scott

On Thu, Feb 17, 2011 at 1:53 PM, Michael Loether <mike at azloether.com> wrote:

> I have a ASA 5505 I am setting up at a small branch office.  Working
> towards a site to site VPN but first I need to get it to talk to itself.
>  Traffic is not passing from inside to outside.
>
> interface Vlan1
>  nameif inside
>  security-level 100
>  ip address 172.19.1.1 255.255.255.0
> !
> interface Vlan2
>  nameif outside
>  security-level 0
>  ip address 64.183.175.22 255.255.255.252
> !
> interface Ethernet0/0
>  switchport access vlan 2
> !
> interface Ethernet0/1
> !
> nat (inside,outside) after-auto source dynamic any interface
>
> DHCPd is running on VL 1 and it is handing out IPs as expected.
>
> ping inside 64.183.175.21
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 64.183.175.21, timeout is 2 seconds:
> ?????
> Success rate is 0 percent (0/5)
>
> ACLs are any any ip on both inside and outside.
>
> Any suggestion would be appreciated.
>
> Mike
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>