[c-nsp] policy and static nat mix?

[Peter Serwe]

Sorry,

ASA 5520, 7.x SW version.

Peter

On Fri, Jan 7, 2011 at 5:15 AM, Ryan West <rwest at zyedge.com> wrote:

> On what type of device?
>
> Sent from handheld
>
> On Jan 7, 2011, at 2:10 AM, Peter Serwe <peter.serwe at gmail.com> wrote:
>
> > I've got static NAT's setup for a network IP, and I want to NAT to a
> > different IP for a particular outside subnet specified in an ACL.
> >
> > That IP is already statically nat'd to another device.
> >
> > I've got the ACL crafted, but I'm unclear how to tie it to the outside I
> > want to tie it to.
> >
> > Just to add to the complexity, that IP is already statically nat'd to
> > another inside address, but on a different inside interface
> >
> > Inbound traffic (initiated from the outside) isn't a huge concern,
> although
> > I'd like to do it for that subnet if possible,
> > inbound return traffic should map back through the NAT (I think).
> >
> > I can't seem to figure out how I can keep both static NAT's but for one
> /29,
> > specifically NAT to a different IP on the outside interface.
> >
> > Peter
> >
> > --
> > Peter Serwe
> > http://truthlightway.blogspot.com/
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Peter Serwe
http://truthlightway.blogspot.com/