[c-nsp] policy and static nat mix?

[Ryan West]

On what type of device?

Sent from handheld 

On Jan 7, 2011, at 2:10 AM, Peter Serwe <peter.serwe at gmail.com> wrote:

> I've got static NAT's setup for a network IP, and I want to NAT to a
> different IP for a particular outside subnet specified in an ACL.
> 
> That IP is already statically nat'd to another device.
> 
> I've got the ACL crafted, but I'm unclear how to tie it to the outside I
> want to tie it to.
> 
> Just to add to the complexity, that IP is already statically nat'd to
> another inside address, but on a different inside interface
> 
> Inbound traffic (initiated from the outside) isn't a huge concern, although
> I'd like to do it for that subnet if possible,
> inbound return traffic should map back through the NAT (I think).
> 
> I can't seem to figure out how I can keep both static NAT's but for one /29,
> specifically NAT to a different IP on the outside interface.
> 
> Peter
> 
> -- 
> Peter Serwe
> http://truthlightway.blogspot.com/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/