[c-nsp] stm-1/stm-4 mux

[Robert Hass]

On Mon, Jan 10, 2011 at 7:37 PM, Raymond Burkholder <ray at oneunified.net> wrote:
> List Members:
> is used for back haul, and STM-1s are split out for local use.
>
> It appears as though a 7206VXR G2 won't accept STM-4 natively, so I need
> something to split a few of the STM-1's out.

Best way is convert STM-4 to GE and just connect to NPE on-board GE
port. You also will not need addtional PA POS cards. From my
experience you will get best performance on NPE-G1/NPE-G2 if all
traffic will pass GE ports on NPE instead of PA cards (like STM-1
POS).

Eg. Raisecom RC702-GESTM4

Maybe something from RAD portfolio.

Rob