[c-nsp] TrendNet TFC1000 Media Converter

[jmadrid2 at gmail.com]

Klementina,

Turned out to be two DIP switches inside the cover of the device. Flipped them both and VOILA!!!


------Original Message------
From: Klementina Miloslava
To: Jose Madrid
Cc: cisco-nsp
Subject: Re: [c-nsp] TrendNet TFC1000 Media Converter
Sent: Jan 12, 2011 3:11 PM

Perhaps, it's faulty.  Can does the media converter work with any other 
gear?



On Wed, 12 Jan 2011, jmadrid2 at gmail.com wrote:

> I have a TrendNet TFC1000S20 media converter connected to a provider 
> uplink with single mode fiber and via copper to a Cisco 4900M. I get 
> link on both sides and all ports appear up but can't pass any traffic. 
> I connected the provider uplink direct to another device and it comes up 
> immediately.  There are no settings or dip switches on the media 
> converter. Can anybody help me out? What am I missing here?  All of the 
> optics match and the config of the switch is straightforward.
>
>
> Sent via BlackBerry by AT&T
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

Sent via BlackBerry by AT&T