[c-nsp] 3560E TCAM Question

[Lincoln Dale]

On 21/01/2011, at 5:07 AM, Jose Madrid wrote:

> I have a 3560 and when do I "show platform tcam utilization" it says that I
> have 1365 directly connected routes.  This is definitely not the case and
> when I do a "show ip route connected" there are various IP blocks shown, but
> none longer than a /26 and maybe a total of 30 routes.  Anyone know how
> these numbers are computed?

so this switch has SVI(s) configured?

each 'host' in a subnet will consume a /32 prefix in the FIB for glueing L3->L2.
its how every "L3 switch" must work.


cheers,

lincoln.