[c-nsp] %SFF8472-5-THRESHOLD_VIOLATION: Te0/2: Rx power low warning; Operating value: -12.5 dBm, Threshold value -9.9 dBm

[David Rothera]

I am going to take a guess in that he will not be using fibre from a service provider.

He states that the issue is on a fibre link between a core switch and this 3560...


On 24 Jan 2011, at 08:09, Muhammad Jawwad Paracha wrote:

> Hi Farooq
> 
> I have gone through similar problem with one of our customer in recent days.
> This issue is related to fiber service provider, get OTDR report from
> service provider also attach "show interface tengig0/x trans detail" output
> from both device.
> 
> Regards
> 
> Jawwad Paracha
> 
> IBM
> 
> On Mon, Jan 24, 2011 at 12:41 PM, Farooq Razzaque <farooq_mcp at hotmail.com>wrote:
> 
>> 
>> Hi All
>> 
>> I am receiving the following errors on aggregation switch
>> (WS-C3560E-12SD-E) which is connected with Core switch (Cat. 6513)
>> 
>> %SFF8472-5-THRESHOLD_VIOLATION: Te0/2: Rx power low warning; Operating
>> value: -12.5 dBm, Threshold value -9.9 dBm
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/