[c-nsp] FWSM Port-channel shutdown

[Ge Moua]

we saw similar behavior for some of the early batches of the fwsm back 
in 04/05; i'd suggest rma these back to cisco; unofficial word was that 
there may have been bad capacitor issues.

--
Regards,
Ge Moua
Network Design Engineer

University of Minnesota | OIT - NTS
--


On 1/26/11 1:06 AM, Andrew Harris wrote:
> Hi,
>
> I have an issue in which when a new FWSM is inserted into one of our
> 6500s the internal Port-channel is immediately put into the admin down
> status.
>
> It is a 6509-E chassis running 12.2(18)SXF4 and the FWSM is running
> 3.1(3) in slot 3.
>
> We have two other FWSM in slot 4 and 6 respectively, running fine.
>
> We have other 6500s running SXF4 with a FWSM in slot 3 so I don't
> think it is a placement issue.
>
> Even if I boot into the maintenance partition it still immediately
> shuts down the etherchannel.
>
> I am sure I am missing something really basic, but any pointers would
> be appreciated!
>
> Thanks
>
> Andy
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/