[c-nsp] PA-2T3+ vs PA-MC-2T3

[Jay Hennigan]

On 1/28/11 12:11 AM, Christopher Wolff wrote:
> Hello,
> 
> I'm looking at setting up a 7206vxr/NPEG1 with two DS3 BGP peers and
> I'm wondering if there's any substantial difference between the
> PA-2T3+ and the PA-MC-2T3.  Thanks in advance.

Yes, very much difference.  The PA-2T3+ is used for clear-channel DS3.
The PA-MC-2T3 is used with a mux to split each DS3 into 28 individual T1s.

For your purpose you want the PA-2T3+.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV