[c-nsp] cat6500 as dhcp client

[Tim Franklin]

> I got a 6506 with WS-X6K-S2U-MSFC2 here running 12.2(18)SXF17
> (ADVENTERPRISEK9_WAN). Basically everything the device does is some
> basic routing between a couple of vlans and some PAT for our internet
> connection. Now we got a new provider where we don't have a static IP
> address anymore and I wanted to use the device as dhcp client but I
> have neither 'ip address dhcp' nor 'ip dhcp client' commands on the
> ethernet interfaces (FE interfaces on WS-X6348-RJ-45 and GE interfaces on
> WS-X6548-GE-TX).

Those are LAN cards / switch ports, so I believe you're going to need the command on the VLAN interface, not the physical port.

Regards,
Tim.