[c-nsp] IPv6 neighbor table via SNMP

[Phil Mayers]

On 07/11/2011 07:24 PM, Peter Rathlev wrote:
> On Mon, 2011-07-11 at 10:39 -0600, Tom Ammon wrote:
>> Hmmm...After generating some IPv6 traffic, then running the walk, it
>> doesn't seem to know about this OID:
>>
>> [root at marchingmenfs ~]# snmpwalk -v 2c -c xxxxxxxxxxxxxxxxx
>>    inscc-rtr-core-a1-2.redhorn CISCO-IETF-IP-MIB::cInetNetToMediaTable
>> Cannot find module (CISCO-IETF-IP-MIB): At line 0 in (none)
>> CISCO-IETF-IP-MIB::cInetNetToMediaTable: Unknown Object Identifier
>
> This looks like a local problem with locating the module. Are you sure
> CISCO-IETF-IP-MIB.my is present and available to your SNMP executable?

Ah, well spotted.

OP may wish to try the numerical OID to check the box actually replies:

snmpwalk $ROUTER 1.3.6.1.4.1.9.10.86.1.1.3.1.3