[c-nsp] 1841 dumps to rommon only on power failure

[Peter Rathlev]

On Mon, 2011-07-18 at 08:19 +0300, techtalm at gmail.com wrote:
> Please share your config and dir command for your flash, it's probably
> related to the location of the image file.

Hmm... It's sad that when Vinny actually took precautions to avoid
answers like these they still appear. Please re-read the original mail.

On Sun, 2011-07-17 at 23:58 -0400, Vinny Abello wrote:
...
> I know what everyone is going to say, your config registers aren't set
> properly... Well, yes they are. I've verified the config register
> being 0x2102 a dozen times now and even reset it a few times to be
> sure. The odd thing about this is if I simply reboot it again, it
> starts fine. Even if I power cycle it with the rocker switch it boots
> up fine. I literally cannot reproduce the problem by powering it off
> and back on, yet every time there is a power failure, it fails to load
> IOS and a reboot is the quick fix.
...

I can't see how configurations details would help. Unless this is a
"feature" of course.

I'm afraid I have nothing to add to the problem itself though.

-- 
Peter