[c-nsp] 7606-S with WS-X6816-GBIC running IOS 15

[chiel]

Hi all,

I got a 7606-S with 72033-advipservicesk9_wan-mz.122-18.SXF17a.bin
running the following modules:

================================
#show module
Mod Ports Card Type                              Model             
Serial No.
--- ----- -------------------------------------- ------------------
-----------
  1   16  Pure SFM-mode 16 port 1000mb GBIC      WS-X6816-GBIC     
XXXXXXXXXXX
  3   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX    
XXXXXXXXXXX
  6    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL    
XXXXXXXXXXX

Mod MAC addresses                       Hw    Fw           Sw          
Status
--- ---------------------------------- ------ ------------ ------------
-------
  1  000d.ed23.9028 to 000d.ed23.9037   1.7   12.2(18r)S1  12.2(18)SXF1 Ok
  3  0013.7fcb.47c8 to 0013.7fcb.47f7   2.3   12.2(14r)S5  12.2(18)SXF1 Ok
  6  0013.c43a.ff00 to 0013.c43a.ff03   5.3   8.4(2)       12.2(18)SXF1 Ok

Mod  Sub-Module                  Model              Serial       Hw    
Status
---- --------------------------- ------------------ ----------- -------
-------
  1  Distributed Forwarding Card WS-F6K-DFC3A       XXXXXXXXXXX  2.6    Ok
  3  Centralized Forwarding Card WS-F6700-CFC       XXXXXXXXXXX  4.1    Ok
  6  Policy Feature Card 3       WS-F6K-PFC3BXL     XXXXXXXXXXX  1.8    Ok
  6  MSFC3 Daughterboard         WS-SUP720          XXXXXXXXXXX  2.6    Ok

Mod  Online Diag Status
---- -------------------
  1  Pass
  3  Pass
  6  Pass
================================


When I upgraded the IOS to c7600s72033-advipservicesk9-mz.150-1.S4.bin
the WS-X6816-GBIC module in slot 1 does not come up. See bellow

================================
cr-tc2-ams#show module
Mod Ports Card Type                              Model             
Serial No.
--- ----- -------------------------------------- ------------------
-----------
  1   16  Pure SFM-mode 16 port 1000mb GBIC      WS-X6816-GBIC     
XXXXXXXXXXX
  3   48  CEF720 48 port 10/100/1000mb Ethernet  WS-X6748-GE-TX    
XXXXXXXXXXX
  6    2  Supervisor Engine 720 (Active)         WS-SUP720-3BXL    
XXXXXXXXXXX

Mod MAC addresses                       Hw    Fw           Sw          
Status
--- ---------------------------------- ------ ------------ ------------
-------
  1  000d.ed23.9028 to 000d.ed23.9037   1.7   Unknown      Unknown     
PwrDown
  3  0013.7fcb.47c8 to 0013.7fcb.47f7   2.3   12.2(14r)S5  15.0(1)S4    Ok
  6  0013.c43a.ff00 to 0013.c43a.ff03   5.3   8.4(2)       15.0(1)S4    Ok

Mod  Sub-Module                  Model              Serial       Hw    
Status
---- --------------------------- ------------------ ----------- -------
-------
  1  Distributed Forwarding Card WS-F6K-DFC3A       XXXXXXXXXXX  2.6   
PwrDown
  3  Centralized Forwarding Card WS-F6700-CFC       XXXXXXXXXXX  4.1    Ok
  6  Policy Feature Card 3       WS-F6K-PFC3BXL     XXXXXXXXXXX  1.8    Ok
  6  MSFC3 Daughterboard         WS-SUP720          XXXXXXXXXXX  2.6    Ok

Mod  Online Diag Status
---- -------------------
  1  Not Applicable
  3  Pass
  6  Pass

router(config)#power enable module 1
router(config)#
21:30:55: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 1, power
not allowed: Unknown Feature Card.
================================

Also when booting IOS 15 I see a problem with the WS-X6748-GE-TX in slot 3:
00:03:40: SP: PREDNLD: LC doesn't meet resource requirement for
pre-download, not reserving memory for slot 3

But that module will still work after the router has booted.


Can somebody point me in the right direction to solve this problem so I
can run the IOS 15 image?

Thanks