[c-nsp] EoMPLS Remote Port Shutdown

[Arie Vayner (avayner)]

Yuri, what is the CE device you are using? Does it have E-LMI support?

 

Tnx

Arie

 

From: Yuri Bank [mailto:yuribank at gmail.com] 
Sent: Friday, June 03, 2011 21:38
To: Arie Vayner (avayner)
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] EoMPLS Remote Port Shutdown

 

I'm trying to achieve a function similar to LFP,link pass through (this
is what its called on Alcalu Ethernet/MPLS switches). If one side of the
psudowire is down, I would like the adjacent port to also go down to
prevent black holing traffic. Obviously lowering hold timers, or using
PFR with IP SLA could prevent such behaviors, but LFP is a nice feature
to have.

-Yuri

On Fri, Jun 3, 2011 at 7:51 AM, Arie Vayner (avayner)
<avayner at cisco.com> wrote:

Yuri,

7600 support Remote Port Shutdown per the below documentation reference,
but it does not actually shutdown the whole port, but actually used
E-OAM to signal to the CPE that the PW is down...

What are you trying to achieve?

Thanks
Arie


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Yuri Bank
Sent: Thursday, June 02, 2011 22:00
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] EoMPLS Remote Port Shutdown


Does anyone know if this feature is in fact supported on the
7600(RSP720-3C-GE)?

There seems to be conflicting information between the Feature Navigator
and other related documents.

According to this article, it is supported as of 12.2(33)SRB, for the
7600.
http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_remote
prtshtdn.html
<http://www.cisco.com/en/US/docs/ios/cether/configuration/guide/ce_remot
e%0Aprtshtdn.html> 

I was curious if anyone knows off hand, or has the resources to easily
find out.

-Yuri

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/