[c-nsp] optic diag commands on 6500

[Mandeep Singh]

Hi,
Is there a similar command on the 6500s as on the Junipers below:
 
 show interfaces diagnostics optics xe-0/0/8 
Physical interface: xe-0/0/8
    Laser bias current                        :  39.304 mA
    Laser output power                        :  0.7050 mW / -1.52 dBm
    Module temperature                        :  41 degrees C / 106 degrees F
    Module voltage                            :  3.2490 V
    Receiver signal average optical power     :  0.1063 mW / -9.73 dBm
Thanks.
-Mandeep