[c-nsp] Nexus N7K-M132XP-12 powerup

Renelson Panosky panocisco77 at gmail.com
Sat Jun 11 16:39:57 EDT 2011


I am working on a N7K with two of the above cards.  they're showing power
down and everytime i tried to power them back up i got the following
errors.

switch(config)# 2011 Jun 12 01:22:36 switch %$ VDC-1 %$
%PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of Module 7  from Command
Line Interface
2011 Jun 12 01:22:39 switch %$ VDC-1 %$
%PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module 7 failed to power up.
(Unknown card. Could not get software-card-id)

I am running Software version 5.0 (2a) and i moved one the card in slot 7
and still getting the same error.


 sho mod
Mod  Ports  Module-Type                      Model              Status
---  -----  -------------------------------- ------------------ ------------
1    0      Unknown Module                                      powered-dn
2    48     10/100/1000 Mbps Ethernet Module N7K-M148GT-11      ok
3    48     10/100/1000 Mbps Ethernet Module N7K-M148GT-11      ok
5    0      Supervisor module-1X             N7K-SUP1           active *
6    0      Supervisor module-1X             N7K-SUP1           ha-standby
7    0      Unknown Module                                      powered-dn
Mod  Power-Status  Reason
---  ------------  ---------------------------
1    powered-dn     Unknown card (Could not get software-card-id)
7    powered-dn     Unknown card (Could not get software-card-id)
Mod  Sw              Hw
---  --------------  ------
2    5.0(2a)         1.7
3    5.0(2a)         1.7
5    5.0(2a)         1.8
6    5.0(2a)         1.8

Mod  MAC-Address(es)                         Serial-Num
---  --------------------------------------  ----------
2    50-3d-e5-b3-35-5c to 50-3d-e5-b3-35-90  JAF1502BDGH
3    50-3d-e5-b9-81-a0 to 50-3d-e5-b9-81-d4  JAF1502BDGF
5    10-8c-cf-1d-e5-d0 to 10-8c-cf-1d-e5-d8  JAF1453BKBK
6    8c-b6-4f-e8-ee-60 to 8c-b6-4f-e8-ee-68  JAF1453BKCF
Mod  Online Diag Status
---  ------------------
2    Pass
3    Pass
5    Pass
6    Pass
Xbar Ports  Module-Type                      Model              Status
---  -----  -------------------------------- ------------------ ------------
1    0      Fabric Module 1                  N7K-C7010-FAB-1    ok
2    0      Fabric Module 1                  N7K-C7010-FAB-1    ok
3    0      Fabric Module 1                  N7K-C7010-FAB-1    ok
Xbar Sw              Hw
---  --------------  ------
1    NA              1.1
2    NA              1.1
3    NA              1.1

Xbar MAC-Address(es)                         Serial-Num
---  --------------------------------------  ----------
1    NA                                      JAF1453BPHE
2    NA                                      JAF1453BPHH
3    NA                                      JAF1453BPAP


More information about the cisco-nsp mailing list