[c-nsp] Nexus N7K-M132XP-12 powerup
Renelson Panosky
panocisco77 at gmail.com
Sun Jun 12 16:35:14 EDT 2011
Tim
Thank you for the tip. I actually took your advice and try to upload the
new version 5.1(3)
but I keep getting this crazy error: TFTP get operation failed:connection
timed out.
I can ping my TFTP server from the switch and i can ping the switch so i
know i have two way communication. Have Anyone of you guys ran into this
situation or any other machine?
On Sat, Jun 11, 2011 at 5:41 PM, Tim Stevenson <tstevens at cisco.com> wrote:
> Hi Renelson,
>
> My first suspicion would be that these are in fact N7K-M132XP-12L cards
> (note the trailing "L"). The "L" version of this card is only supported from
> 5.1, I'd recommend 5.1(3).
>
> Otherwise, I'd open a TAC case, as support for the non-L version is there
> from day 1.
>
> Hope that helps,
> Tim
>
> At 01:39 PM 6/11/2011, Renelson Panosky pronounced:
>
> I am working on a N7K with two of the above cards. they're showing
>> power
>> down and everytime i tried to power them back up i got the following
>> errors.
>>
>> switch(config)# 2011 Jun 12 01:22:36 switch %$ VDC-1 %$
>> %PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of Module 7 from Command
>> Line Interface
>> 2011 Jun 12 01:22:39 switch %$ VDC-1 %$
>> %PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module 7 failed to power up.
>> (Unknown card. Could not get software-card-id)
>>
>> I am running Software version 5.0 (2a) and i moved one the card in slot 7
>> and still getting the same error.
>>
>>
>> sho mod
>> Mod Ports Module-Type Model Status
>> --- ----- -------------------------------- ------------------
>> ------------
>> 1 0 Unknown Module powered-dn
>> 2 48 10/100/1000 Mbps Ethernet Module N7K-M148GT-11 ok
>> 3 48 10/100/1000 Mbps Ethernet Module N7K-M148GT-11 ok
>> 5 0 Supervisor module-1X N7K-SUP1 active *
>> 6 0 Supervisor module-1X N7K-SUP1 ha-standby
>> 7 0 Unknown Module powered-dn
>> Mod Power-Status Reason
>> --- ------------ ---------------------------
>> 1 powered-dn Unknown card (Could not get software-card-id)
>> 7 powered-dn Unknown card (Could not get software-card-id)
>> Mod Sw Hw
>> --- -------------- ------
>> 2 5.0(2a) 1.7
>> 3 5.0(2a) 1.7
>> 5 5.0(2a) 1.8
>> 6 5.0(2a) 1.8
>>
>> Mod MAC-Address(es) Serial-Num
>> --- -------------------------------------- ----------
>> 2 50-3d-e5-b3-35-5c to 50-3d-e5-b3-35-90 JAF1502BDGH
>> 3 50-3d-e5-b9-81-a0 to 50-3d-e5-b9-81-d4 JAF1502BDGF
>> 5 10-8c-cf-1d-e5-d0 to 10-8c-cf-1d-e5-d8 JAF1453BKBK
>> 6 8c-b6-4f-e8-ee-60 to 8c-b6-4f-e8-ee-68 JAF1453BKCF
>> Mod Online Diag Status
>> --- ------------------
>> 2 Pass
>> 3 Pass
>> 5 Pass
>> 6 Pass
>> Xbar Ports Module-Type Model Status
>> --- ----- -------------------------------- ------------------
>> ------------
>> 1 0 Fabric Module 1 N7K-C7010-FAB-1 ok
>> 2 0 Fabric Module 1 N7K-C7010-FAB-1 ok
>> 3 0 Fabric Module 1 N7K-C7010-FAB-1 ok
>> Xbar Sw Hw
>> --- -------------- ------
>> 1 NA 1.1
>> 2 NA 1.1
>> 3 NA 1.1
>>
>> Xbar MAC-Address(es) Serial-Num
>> --- -------------------------------------- ----------
>> 1 NA JAF1453BPHE
>> 2 NA JAF1453BPHH
>> 3 NA JAF1453BPAP
>> _______________________________________________
>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>> <https://puck.nether.net/mailman/listinfo/cisco-nsp>
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at <http://puck.nether.net/pipermail/cisco-nsp/>
>> http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>
>
>
> Tim Stevenson, tstevens at cisco.com
> Routing & Switching CCIE #5561
> Distinguished Technical Marketing Engineer, Cisco Nexus 7000
> Cisco - http://www.cisco.com
> IP Phone: 408-526-6759
> ********************************************************
> The contents of this message may be *Cisco Confidential*
> and are intended for the specified recipients only.
>
>
>
More information about the cisco-nsp
mailing list