[c-nsp] Newb Question about site to site vpn.

[Scott Voll]

What is the configuration difference?

--scott

On Thu, Jun 16, 2011 at 10:00 AM, manderson <chiefwfb at gmail.com> wrote:

> Sounds like you maybe have it set up in client mode vs. network mode
>
> On Thu, Jun 16, 2011 at 8:26 AM, <cisco-nsp-request at puck.nether.net>
> wrote:
>
> > Date: Thu, 16 Jun 2011 07:45:56 -0700
> > From: Scott Voll <svoll.voip at gmail.com>
> > To: cisco-nsp at puck.nether.net
> > Subject: [c-nsp] Newb Question about site to site vpn....
> > Message-ID: <BANLkTimZhCG2ALyw=GQGx2EbUXPNfiihiw at mail.gmail.com>
> > Content-Type: text/plain; charset=ISO-8859-1
> >
> > I have setup a couple 881's to do a Dynamic site to site vpn tunnel back
> to
> > my ASA at the head end.
> >
> > All traffic ends up stopping even thou the tunnel is still up.  If I
> start
> > some traffic from the 881 than the traffic starts working from the head
> end
> > (ASA side).
> >
> > What have I missed to get traffic on the ASA side to start passing
> traffic?
> >  With out starting it on the far side (881).
> >
> > TIA
> >
> > Scott
> >
> >
> > ------------------------------
> >
> >