[c-nsp] Dot11Radio0 ipv6 command

[Gert Doering]

Hi,

On Wed, Jun 22, 2011 at 04:17:41PM +0000, Michael K. Smith - Adhost wrote:
> This is the workaround when you can't put the address on the BVI, which
> you can't in some cases.

Well, your setup is just "plain routed mode", putting the IPv6 address
on the dot11radio interface.

The problem is that this just doesn't work on most of the 8xx and 18xx
gear that has WiFi hardware built-in... it just doesn't take the command.

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20110622/3b1dda55/attachment.pgp>