[c-nsp] Dot11Radio0 ipv6 command

[Nikolay Shopik]

On 23/06/11 00:46, Gert Doering wrote:
> Hi,
>
> On Wed, Jun 22, 2011 at 08:36:21PM +0400, Nikolay Shopik wrote:
>> Because it's added only in 15.1(2)T
>>
>> http://www.cisco.com/en/US/customer/docs/ios/15_1/release/notes
>> /151-2TNEWF.html#wp43436
>
> Which links here...
>
> http://www.cisco.com/en/US/customer/docs/ios/ipv6/configuration/guide/ip6-addrg_bsc_con.html
>
> ... which says
>
> "Bridge-Group Virtual Interfaces (BVIs) in IPv6 are not supported with
>   NAT-PT and wireless interfaces Dot11Radio."
>
> Fun.
>
> I really wonder what's so deeply broken inside IOS that it has been
> impossible to add working IPv6 to dot11radio (routed or bridged!) in
> the course of *four* *major* releases (12.2T to 15.1T).  But maybe I
> don't want to know.
>
> gert
>

And btw, Cisco announce EOL/EOS for 1800 series with Access Point year 
earlier then same boxes w/o AP, and I miss contract attachment :(.

Well there probably some reason for that, because I even struggle to 
enable policy-map with shaping on dot11radio interfaces, which cause 
HUGE memory leak on 15.0M releases and tracebacks on 15.1M.