[c-nsp] Dot11Radio0 ipv6 command

[Gert Doering]

Hi,

On Wed, Jun 22, 2011 at 09:06:22PM +0000, Lee Riemer wrote:
> What about a plain L2 bridge between an Ethernet interface and the radio interface, then a physical cable (bridge) to another IPv6 routed/VLAN port?

Yes, of course there are workarounds to make this work with Cisco devices.

Like "use the Cisco as a doorstop and get something sane".

But that's not really the point :-)

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 305 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20110623/136a4894/attachment.pgp>