[c-nsp] Dot11Radio0 ipv6 command

[Lee Riemer]

What about a plain L2 bridge between an Ethernet interface and the radio interface, then a physical cable (bridge) to another IPv6 routed/VLAN port?

Lee

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Gert Doering
> Sent: Wednesday, June 22, 2011 3:46 PM
> To: Nikolay Shopik
> Cc: Gert Doering; cisco-nsp
> Subject: Re: [c-nsp] Dot11Radio0 ipv6 command
> 
> Hi,
> 
> On Wed, Jun 22, 2011 at 08:36:21PM +0400, Nikolay Shopik wrote:
> > Because it's added only in 15.1(2)T
> >
> > http://www.cisco.com/en/US/customer/docs/ios/15_1/release/notes
> > /151-2TNEWF.html#wp43436
> 
> Which links here...
> 
> http://www.cisco.com/en/US/customer/docs/ios/ipv6/configuration/guide/
> ip6-addrg_bsc_con.html
> 
> ... which says
> 
> "Bridge-Group Virtual Interfaces (BVIs) in IPv6 are not supported with  NAT-
> PT and wireless interfaces Dot11Radio."
> 
> Fun.
> 
> I really wonder what's so deeply broken inside IOS that it has been
> impossible to add working IPv6 to dot11radio (routed or bridged!) in the
> course of *four* *major* releases (12.2T to 15.1T).  But maybe I don't want
> to know.
> 
> gert
> 
> --
> USENET is *not* the non-clickable part of WWW!
>                                                            //www.muc.de/~gert/
> Gert Doering - Munich, Germany                             gert at greenie.muc.de
> fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de