[c-nsp] Boot from TFTP
Peter Rathlev
peter at rathlev.dk
Fri Jun 24 16:40:47 EDT 2011
On Fri, 2011-06-24 at 13:23 -0700, Scott Voll wrote:
> %SYS-3-IMAGE_TOO_BIG: 'tftp://
> 10.14.1.108/c2800nm-advipservicesk9-mz.151-3.T1.bin' is too large for
> available memory (51691544 bytes).
> %SYS-6-READ_BOOTFILE_FAIL: tftp://
> 10.14.1.108/c2800nm-advipservicesk9-mz.151-3.T1.bin File read failed
> -- Not enough space.
>
>
> Config looks like this: boot system tftp://
> 10.14.1.108/c2800nm-advipservicesk9-mz.151-3.T1.bin
>
> Memory needed is 512mb I have "Cisco 2821 (revision 53.50) with
> 776192K/10240K bytes of memory." so I should have enough ram.
I'm guessing it's the flash. You probably have 51691544 bytes left on
the flash device. The image is 64562864 bytes.
--
Peter
More information about the cisco-nsp
mailing list