[c-nsp] Boot from TFTP

[Juergen Marenda]

No,

boot system does not copy to flash,
it loads file to RAM amd starts it.
 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Peter Rathlev
> Sent: Friday, June 24, 2011 10:41 PM
> To: Scott Voll
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Boot from TFTP
> 
> On Fri, 2011-06-24 at 13:23 -0700, Scott Voll wrote:
> > %SYS-3-IMAGE_TOO_BIG: 'tftp://
> > 10.14.1.108/c2800nm-advipservicesk9-mz.151-3.T1.bin' is too 
> large for
> > available memory (51691544 bytes).
> > %SYS-6-READ_BOOTFILE_FAIL: tftp://
> > 10.14.1.108/c2800nm-advipservicesk9-mz.151-3.T1.bin File read failed
> > -- Not enough space.
> > 
> > 
> > Config looks like this:  boot system tftp://
> > 10.14.1.108/c2800nm-advipservicesk9-mz.151-3.T1.bin
> > 
> > Memory needed is 512mb  I have "Cisco 2821 (revision 53.50) with
> > 776192K/10240K bytes of memory."  so I should have enough ram.
> 
> I'm guessing it's the flash. You probably have 51691544 bytes left on
> the flash device. The image is 64562864 bytes.
> 
> -- 
> Peter
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>