[c-nsp] DFC3B distribution card on WS-X6708-10G

[Chris Evans]

3c or 3cxl is all that is supported on that module.
On Mar 4, 2011 5:45 AM, "Jiri Prochazka" <jiri.prochazka at superhosting.cz>
wrote:
> Hello,
>
> I wonder if I can swap original DFC3CXL distribution card used on
> WS-X6708-10G-3CXL with legacy DFC3B module without any problem?
>
> So after this swap it would be WS-X6708-10G-3B, which is on the one hand
> quite strange combination but on the other hand..it should work, righ?
>
>
>
> I've found only one minor relevant note at documentation, which is
> saying that the 8-port 10G card (WS-X6708-10G-3C/XL) must have a DFC
> installed for it to be operational. Nowhere is noted if it has to be CXL
> version..
>
> This X6708 card is operating in the chassis with Sup720-3B, so whole
> switch is operating in PFC3B mode now and 3CXL is not utilized..
>
>
>
> Thank you for advice.
>
>
>
>
> Jiri Prochazka
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/