[c-nsp] Replacement for 3550-12T being used as a router - IPv6 related

Lobo lobotiger at gmail.com
Thu Mar 10 14:29:01 EST 2011


Can it handle 100-120Mbps of traffic though?  I thought this platform 
was limited to something well below that?

Jose

On 3/10/2011 10:57 AM, Andrew Wentzell wrote:
> On Thu, Mar 10, 2011 at 10:30 AM, Lobo<lobotiger at gmail.com>  wrote:
>
>> Considering we need some new, cheap router/layer3 switch that can:
>> - police at least 128 customers
>> - run OSPFv3
>> - support a fair amount of routes
>> - support dual stack IPv6
>> - need at least 4-6 Gig interfaces
>>
>> would you have any recommendations?
>>
>> Thanks.
>>
>> Jose
>>
>> P.S.  I've tried recommending a refurb'd 7301 with a dual FE port adapter
>> but I do get some raised eyebrows at the cost of ~$8K.
> How about a 2821 with 2-4x HWIC-1GE-SFP? I don't know what the policer
> limits are, but it should meet your other requirements and cost
> significantly less than the 7301.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list