[c-nsp] New Joiner - ME3600X and tools

[Vinny_Abello at Dell.com]

Back in November when I questioned our Cisco account rep while I was
purchasing a half dozen of these, I was told ~summer of '11 for IPv6 on the
ME3600X... I'm sure that's been pushed back based on newer feedback it seems
people are getting. This is most unfortunate. I don't understand how Cisco
can ignore IPv6 on newer products like this. It is indeed totally
unacceptable and does make these L2 only having to rely on something else to
do IPv6 in L3 the access layer. :(

-Vinny

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Asbjorn Hojmark -
Lists
Sent: Monday, March 28, 2011 3:36 PM
To: 'Jon Harald Bøvre'
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] New Joiner - ME3600X and tools

> IPv6 supported? No. Probably coming in october this year.

Last I heard was 'sometime 2012' for IPv6 support -- Totally unacceptable
for any device doing L3 in SP environments, IMO -- so I consider it a
L2-only box. 

-A

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/