[c-nsp] Layer 2 Local Switching - 7606 ES-20

[Andrew K.]

Thanks Peter,

I did suspect that was the case but the document was slightly unclear to 
me.  Thanks for confirming that, I appreciate it.

I could simply use the switching capabilities but am looking for a way 
to segregate our switched network, it has become rather large.

Thanks again,
Andrew.

On 3/30/2011 5:29 PM, Peter Rathlev wrote:
> On Wed, 2011-03-30 at 23:23 +0200, Peter Rathlev wrote:
>> On Wed, 2011-03-30 at 15:34 -0400, Andrew K. wrote:
>>> To achieve this I am trying to use layer 2 local switching between two
>>> router ports on a ES20 (7600-ES20-GE3C) card.
>> [...]
>>> connect WORKTHISTIME GigabitEthernet1/0/3 GigabitEthernet1/0/2
>> This doesn't work on a switch, which the 7600 us.
> Eh... small correction (apart from the speling) before anyone else
> embarrasses me: You can of course have certain modules in a 7600 switch
> do that, same for a 6500 switch. I don't know if the ES module falls in
> that category.
>