[c-nsp] MLS rate limit logging ??

[ryanL]

+1. i fought in vain for this as well. there's no way that i know of
to see if the limiters are being hit, other than some likely hidden
command. would love to know if someone has it!


On Thu, Mar 31, 2011 at 10:35 AM, Jeff Fitzwater <jfitz at princeton.edu> wrote:
> Is there a way to log MLS RATE-LIMITs?
>
>
> I have enabled "mls rate-limit multicast ipv4 pim" due to a downstream host on a PIM enabled vlan, sending hundreds  of PIM joins per second and spiking CPU.  The MLS rate limit worked, but would like to know when the limit is hit, but I see no way to enable logging for MLS RATE LIMITERS.
>
>
> Any ideas?
>
>
>
> Jeff Fitzwater
> OIT Network Systems
> Princeton University
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>