[c-nsp] BGP communities and VRFs...

[Bill Blackford]

This is true on IOS-XE as well.

ip bgp-community new-format   ! <=======
ip community-list 10 permit 65333:888 no-export

-b



On Thu, May 19, 2011 at 6:05 AM, Phil Mayers <p.mayers at imperial.ac.uk> wrote:
> On 19/05/11 13:52, Jeff Kell wrote:
>>
>> Odd.  I managed to get it to work, just not as expected.
>>
>> Legacy (no VRF enabled, 12.2(18)SXF17) "ip community-list 10 permit
>> 65532:888 no-export"
>> is accepted, but on VRF-enabled 12.2(33)SXI3 becomes "permit 4281598840
>> no-export".
>>
>> An "ip community-list 100 permit 65532:888" stays in that format, but
>> matching on an
>> incoming route-map doesn't match 100, it matches 10.
>
> I don't see this on SXI5:
>
> ip community-list 10 permit 65000:1
> ip community-list 100 permit 65000:1
> ip community-list standard BAR permit 65000:1
> ip community-list expanded FOO permit 65000:1
>
> Do you have the global:
>
> ip bgp-community new-format
>
> ?
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Bill Blackford
Network Engineer

Logged into reality and abusing my sudo privileges.....