[c-nsp] OC-48 transport over Cisco 6500

[Mack McBride]

The POS looks like a standard 6500 layer 3 port with of course the added POS commands.
This means standard MPLS commands should work.
The older POS cards lack some of the functionality of the newer cards.
Someone may have more information if you provide the exact line card.

Mack McBride
Network Architect

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of FF
Sent: Monday, May 23, 2011 9:25 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] OC-48 transport over Cisco 6500

If I'm trying to transport OC-48 between two customer locations via
MPLS on a Cisco 6500...

Would simple MPLS/xconnect work using the appropriate OC-48-OSM on
each side? [i.e., will the OC-48-OSM look like a traditional SONET
interface such as one would see from a 15454 or similar mux to the
customer equipment?]

thanks in advance,

--

FF
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/