[c-nsp] IS-IS on L3 vlan interfaces

[Mark Tinka]

On Sunday, May 29, 2011 02:42:19 PM Walter Keen wrote:

> If I set isis network point-to-point on two of these 3,
> then I instantly get a L1L2 adjacency on those two.  I
> want a L1L2 adjancency on all 3  (preferably without
> creating point to point vlans)

What about your 'router isis' configuration. You've only 
sent the IS-IS configuration for the interfaces.

Can you also confirm that the switch which is 
interconnecting this 3x devices supports (or is larger than) 
the MTU value you're implementing on said routers?

Cheers,

Mark.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20110529/2a4eb92a/attachment.pgp>