[c-nsp] Changing VLANs

[Thomason, Simon]

You could use EEM and tcl scripts to do this.


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mohammad Khalil
Sent: Thursday, 3 November 2011 4:15 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Changing VLANs


Hi all , i have a layer 2 switch , i want to connect a PC to a port and number of DHCP servers to other ports
i want to the PC to communicate with each server every 5 minutes
for example PC is connected to F0/1 and Server 1 is connected to F0/2 , after 5 minutes i want the port the PC connecting to to change its VLAN in order to communicate with Server 2 which is connected to port F0/3 (which is on different VLAN)

Thanks

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


Show Your RACQ Card & Save during November and save 20% at Repco. For more info visit: www.racq.com/repco

Please Note: If you are not the intended recipient, please delete this email as its use is prohibited.  RACQ does not warrant or represent that this email is free from viruses or defects.  If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.