[c-nsp] Changing VLANs

[Joshua Atterbury]

Surely if you have a number of dhcp servers theres a layer3 switch or router in the network that you can use to route between pc and servers

Sent from my iPhone

On 03/11/2011, at 1:11 PM, "Thomason, Simon" <Simon.Thomason at racq.com.au> wrote:

> You could use EEM and tcl scripts to do this.
> 
> 
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Mohammad Khalil
> Sent: Thursday, 3 November 2011 4:15 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Changing VLANs
> 
> 
> Hi all , i have a layer 2 switch , i want to connect a PC to a port and number of DHCP servers to other ports
> i want to the PC to communicate with each server every 5 minutes
> for example PC is connected to F0/1 and Server 1 is connected to F0/2 , after 5 minutes i want the port the PC connecting to to change its VLAN in order to communicate with Server 2 which is connected to port F0/3 (which is on different VLAN)
> 
> Thanks
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
> 
> Show Your RACQ Card & Save during November and save 20% at Repco. For more info visit: www.racq.com/repco
> 
> Please Note: If you are not the intended recipient, please delete this email as its use is prohibited.  RACQ does not warrant or represent that this email is free from viruses or defects.  If you do not wish to receive any further commercial electronic messages from RACQ please e-mail unsubscribe at racq.com.au or contact RACQ on 13 19 05.
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/