[c-nsp] Full BGP Feed Convergence Time on ASR 1006 RP2 Setup

[Joseph Jackson]

On Fri, Nov 11, 2011 at 2:45 AM, Mark Tinka <mtinka at globaltransit.net> wrote:

> I just brought up an ASR1006 + RP2 + ESP20 + SIP10, peering
> with 3x route reflectors, receiving a full v4/v6/VPNv4 table
> from them, simultaneously.
>
> For v4, the 1st session was done in about 48 seconds, the
> other two were done about 10 seconds earlier than that.
>
> Hope this helps.
>
> Cheers,
>
> Mark.

Silly question time,  but how are you judging that time on - router
has stopped receiving prefixes on show ip bgp sum (or neighbor).  Or
are you defining it having a full feed with some other metric?

Thanks