[c-nsp] ME3600 IOS / SPAN

[Ankur Mittal]

Thanks for the information. 
 
Are you saying that we can't push more than 700 Mbps thorugh a GigE interface on the ME3600 switch when running a 15.1(2) version. 
 
We are noticing some weird problems with this platform-
 
- Upgraded the software from 12.2(52)EY to 15.1(2)EY and when the switch rebooted, we lost Out-of-Band management to the switch. 
Resolution: Had to console into the switch and do a shut/no shutdown on the OOB mgmt interface.
 
- Also did "nop cdp enable" globally and lost OOB mgmt functionaily. Had to do the same thing as mentioned above to resolve the issue. 
I noticed that this is actually mentioned the "Open caveats"
 
What I am mainly concerned about is the service instance / bridge domain model that was introduced in the whales version. Have you found any 
weird behaviour with doing simple VLAN manipulation or Q-in-Q and the QoS classification on ingress and or other catastrophic problems.
 
I would appreciate if you guys can share any other findings or open caveats that are not mentioned in the cisco release notes but do exist on this software version.
 
Thanks- Ankur