[c-nsp] 10/100/1000 copper SFP in ASR9k / autoneg

[Tim Kleefass]

On 19.10.2011 2:27 PM, Jared Mauch wrote:
> The ASR9K does not support auto-neg, you have to manually set the speed on the 40GE card.

This is true for the line-cards out now.  Newer line-cards should
support auto-neg.

On 19.10.2011 10:35 AM, Phil Mayers wrote:
> In providing assistance for a couple of other sites connected to that
> same router, it's been mentioned that the tri-rate copper SFPs don't
> support autoneg?

We have some of this SFPs, if tried in the Lab, you have to set the
speed manually.

Cheers,	
	Tim