[c-nsp] partial prefix load in ibgp

[Nikolay Shopik]

Hey,

I've got two borders connected via ibgp, both receving full-view via 
uplinks, and I notice one of borders receiving about 190K prefixes via 
ibgp. But I'm clearly sure there no filters at all.
Configuration between borders are pretty simple and consist just two lines.

neighbor x.x.x.x remote-as 65536
neighbor x.x.x.x next-hop-self

Only difference is one border have configuration via address-family ipv4 
while other doesn't have such sub-command, everything under router bgp. 
Any ideas where should I look?

Thanks