[c-nsp] VRF Selection based on IP

[Saku Ytti]

On (2011-09-06 11:03 -0500), Dave Weis wrote:

> Does anyone have a suggestion on how to implement VRF selection based on incoming IP on a 7200?
> 
> http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/vrfselec.html

This is the old config, it is almost useless as you cannot have overlapping addressing. Unfortunately some platforms like NSE100 only support this config mode.

New config is done via PBR:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srb2mvrf.html

-- 
  ++ytti