[c-nsp] VRF Selection based on IP

[Dave Weis]

That looks like it will work, thank you all for the replies. I'll give it a try.

Dave


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Saku Ytti
Sent: Tuesday, September 06, 2011 11:47 AM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] VRF Selection based on IP

On (2011-09-06 11:03 -0500), Dave Weis wrote:

> Does anyone have a suggestion on how to implement VRF selection based on incoming IP on a 7200?
> 
> http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/vrfselec.html

This is the old config, it is almost useless as you cannot have overlapping addressing. Unfortunately some platforms like NSE100 only support this config mode.

New config is done via PBR:
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srb2mvrf.html

-- 
  ++ytti
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/