[c-nsp] Traffic Control

[Jaycee Cockburn]

Hi Mo,
Depends on where Subnet A & B are physically attached...
If they are on different (sub) interfaces you can always use
VRF-lite...quick and easy and very secure...

If not, I think policy routing is your friend...

On Wed, 2011-09-07 at 23:13 +0300, Mohammad Khalil wrote:
> Hi , i have 2 subnets 
> subnet A is assigned to servers connected to Router A
> and subnet B is assigned to a Leased Line connection terminated to Router B (Internet connection)
> i want to control subnet B in a fashion just to access subnet A (dont access the internet)
> what is the best way to accomplish this?
> 
> Thanks
>  		 	   		  
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Kind Regards

JC Cockburn