[c-nsp] Regain CLI access with snmp sets?

[Brian Raaen]

This link may be what you are looking for.
http://cisco.cluepon.net/index.php/TCB_Recovery

---
Brian Raaen
Network Architect
Zcorum
braaen at zcorum.com

On Thu, Sep 08, 2011 at 02:40:23PM -0700, Mike wrote:
> Hello,
> 
> 	I am sure this can be done and am calling on my fellows to help
> light the way!
> 
> 	I have a cisco 2970 switch newly installed in a remote,
> inaccessible location that presently lacks OOB serial access. Due to
> a config error, I cannot telnet into the unit due to missing config
> elements:
> 
> Escape character is '^]'.
> 
> 
> Password required, but none set
> Connection closed by foreign host.
> 
> 
> 	I do have, however, a writable snmp community string. So I am
> wondering if it would be possible to update the running config using
> snmp in order to give me telnet access to this unit? It would beat a
> trip back out there and would serve my cisco education well too. So
> how about it, any takers?
> 
> Mike-
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/