[c-nsp] Regain CLI access with snmp sets?

Persio Pucci persio at gmail.com
Fri Sep 9 08:53:58 EDT 2011


Anybody would have a working recipe for routers, specialy 7200? I've
been trying the ones posted at Cisco (specially the one where you need
several commands) but the final "activate" command gets an error
response...

Enviado via iPhone

Em 08/09/2011, às 18:44, Mike <mike-cisconsplist at tiedyenetworks.com> escreveu:

> Hello,
>
>    I am sure this can be done and am calling on my fellows to help light the way!
>
>    I have a cisco 2970 switch newly installed in a remote, inaccessible location that presently lacks OOB serial access. Due to a config error, I cannot telnet into the unit due to missing config elements:
>
> Escape character is '^]'.
>
>
> Password required, but none set
> Connection closed by foreign host.
>
>
>    I do have, however, a writable snmp community string. So I am wondering if it would be possible to update the running config using snmp in order to give me telnet access to this unit? It would beat a trip back out there and would serve my cisco education well too. So how about it, any takers?
>
> Mike-
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/



More information about the cisco-nsp mailing list