[c-nsp] Bridging T1s together on PA-MC-T3

Jay Nakamura zeusdadog at gmail.com
Tue Sep 13 11:56:11 EDT 2011


Are you actually Ethernet bridging or just want to TDM cross connect?  I
don't think you can cross connect it but perhaps you can create a VRF and
route IP?
On Sep 13, 2011 11:47 AM, "Nick Voth" <nvoth at estreet.com> wrote:
> Folks,
>
> I'm hoping this is easy/obvious question, but I've looked around and can't
> find the config I'm looking for.
>
> I have several channelized DS3s coming in and terminating on PA-MC-T3
cards.
> I use those for regular "ppp" T1 circuits out to client sites.
>
> I now have the need to "bridge" 2 client sites together, and am wondering
if
> there's a way to bridge 2 individual T1 circuits together on one DS3 card.
>
> The 2 client sites don't need access to our LAN or Internet. This would
> literally be a private line connection between the 2 sites, with us in the
> middle bridging them together.
>
> The client's Internet access is totally separate from this proposed
> solution.
>
> I know I can have the local telco just do a point-to-point circuit between
> the 2 client sites, but then we wouldn't have any visibility for up/down
> monitoring, etc.
>
> Any advice would really help.
>
> Thanks,
>
> -Nick Voth
>
>
>
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list